DTR-20.1_En_A.book Page 29 Wednesday, April 8, 2009 10:06 PM
Connecting the AV receiver—Continued
Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source
With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs
Hint!
via the AV receiver, which is useful if your TV has no audio outputs.
Step 1: Video Connection
Choose a video connection that matches the video source (
You must connect the AV receiver to your TV with the same type of connection.
Step 2: Audio Connection
Choose an audio connection that matches the video source ( ,
• With connection
, you can listen to and record audio from the video source or listen in Zone 2.
a
• To enjoy Dolby Digital and DTS, use connection
and
.)
c
Connection
COMPONENT VIDEO IN 2 (CBL/SAT)
A
B
a
DIGITAL IN COAXIAL 2 (CBL/SAT)
b
DIGITAL IN OPTICAL 1 (GAME)
c
c
b
A
OPTICAL
OUT
Connect one or the other
Connection
c
must be
assigned (see page 40)
or
. (To record or listen in Zone 2 as well, use
b
c
AV receiver
Signal flow
CBL/SAT IN V
CBL/SAT IN L/R
L
COAXIAL
Y
P
P
B
R
OUT
COMPONENT VIDEO OUT
Satellite, cable, set-top box, etc.
or
, and then make the connection.
A
B
)
, or
), and then make the connection.
a
b
c
Video source
⇐
Component video output
⇐
Composite video output
⇐
Analog audio L/R output
⇐
Digital coaxial output
⇐
Digital optical output
B
C
a
R
AUDIO
VIDEO
OUT
OUT
and
, or
a
b
a
29