Sidestand; Sidestand Switch Operation Check - Yamaha CYGNUS.X XC125 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Sidestand

The sidestand is located on the left side
of the frame. Raise the sidestand or lower
1
it with your foot while holding the motor-
cycle upright.
2
NOTE:
The built-in sidestand switch is part of
3
the ignition circuit cut-off system, which
cuts the ignition in certain situations.
4
(See further down for an explanation of
the ignition circuit cut-off system.)
5
w
6
The vehicle must not be ridden with
the sidestand down, or if the
7
sidestand cannot be properly moved
up (or does not stay up), otherwise
8
the sidestand could contact the
ground and distract the operator, re-
9 sulting in a possible loss of control.
Yamaha's ignition circuit cut-off sys-
tem has been designed to assist the
operator in fulfilling the responsibil-
ity of raising the sidestand before
starting off. Therefore, check this sys-
tem regularly as described below and
EAU15300
have a Yamaha dealer repair it if it
does not function properly.
EWA10240
Sidestand switch operation
check
Check the operation of the sidestand
switch against the information below.
w
8 8 8 8 8 The vehicle must be placed on
8 8 8 8 8 If a malfunction is noted, have a
3-10
the centerstand during this in-
spection.
Yamaha dealer check the system
before riding.
EAUT1091
EWA10260