2. Remove the panel by removing
the screw.
1. Screw
3. Remove the battery holder brac-
ket by removing the bolt.
1. Holder
2. Battery
3. Screw
PERIODIC MAINTENANCE AND ADJUSTMENT
4. Pull the battery out from the bat-
tery box, and then disconnect the
battery couplers.
1. Negative battery lead
2. Positive battery lead (red)
To install the battery
1. Connect the battery couplers,
and then place the battery in the
original position.
2. Install the battery holder bracket
by installing the bolt.
3. Install the panel by installing the
screw.
4. Close the storage compartment.
5. Fully charge the battery before
installation.
6-25
NOTICE
Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.
ECA16530
6