Replacing A Tail/Brake Light Bulb Or A Rear Turn Signal Light Bulb - Yamaha XMAX YP250R Owner's Manual

Replacing a tail/brake light
bulb or a rear turn signal
light bulb
1. Place the scooter on the centers-
tand.
2. Open the seat, and then remove
the rear storage compartment.
(See page 3-17).
1. Rear storage compartment
2. Bolt
3. Remove the tail/brake light and
turn signal light bulb holder by
pulling it outward.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAUS1442
1. Turn signal light bulb socket/ Tail/brake light
bulb socket
1. Unlock.
1. Remove
4. Remove the burnt-out bulb by
1. Turn signal light bulb
2. Tail/brake light bulb
6-29
pushing it in and turning it coun-
terclockwise.
6