Front Brake Lever; Rear Brake Lever - Yamaha XMAX YP250R Owner's Manual

Hide thumbs Also See for XMAX YP250R:
Table of Contents

Advertisement

NOTE:
Even if the key is turned from "ON" to
"OFF" with the hazard lighting on, the
hazard lighting will continue to flash
regardless of the hazard switch posi-
tion. To cancel the hazard lighting, the
key must be turned to "ON" and the
hazard switch must be set to the "h"
position.
The hazard lighting is used in case of
an emergency or to warn other drivers
when your scooter is stopped where
it might be a traffic hazard.
CAUTION:
Do not use the hazard light for an
extended length of time, otherwise
the battery may discharge.
Start switch "
"
g
With the sidestand up, push this
switch while applying the front or rear
brake to crank the engine with the
starter.
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
INSTRUMENT AND CONTROL FUNCTIONS

Front brake lever

1. Front brake lever
ECA10060
The front brake lever is located on the
right handlebar grip. To apply the
front brake, pull this lever toward the
handlebar grip.
EAU12720
ECA10050
EAU12900

Rear brake lever

1. Rear brake lever
The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull this lever toward the hand-
lebar grip.
3-10
EAU12950
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xmax 250i

Table of Contents