Toshiba E-STUDIO555 Copying Manual page 98

4 EDITING FUNCTIONS
5
Select other copy modes as required, and then press the [START] button on the control
panel.
When the originals are placed on the RADF, scanning and copying start. When they are placed on the original
glass, follow steps 6 and 7.
6
Place the next original, and then press the [START] button on the control panel.
Scanning of the next original starts. The scanning also starts when you press [YES] on the touch panel and then
the [START] button on the control panel. If you have more than one original, repeat this step until the scanning of all
the originals is finished.
7
When the scanning of all the originals is finished, press [FINISHED] on the touch panel.
Copying starts.
96 2IN1 / 4IN1