Panasonic CF-61 Series Operating Instructions Manual page 7

Back
EXT.DISPLAY
PARALEL
Serial Port
Use this port to connect a serial
mouse or a serial communica-
tions device such as a modem.
Parallel Port
Use this port to connect a printer
or some other parallel device.
Ext. Display Port
Use this port to connect an external
display.
Bottom
Expansion Bus Connector
P.21
Infrared Communication Port (IrDA compliant)
Ventilation Hole
Do not place objects near the ventilation area.
SERIAL
Audio-In Jack
Use this jack to connect the computer to the audio output terminal(s) of
audio or video equipment. An external microphone can be used for input;
to change the volume level of an external microphone, select [Line-In] on
[Volume Control] or [Recording Control] and drag the volume slider to
the proper position. Input from a monaural microphone will be heard from
the left speaker only.
the Audio-In Jack"
Headphone Jack
Use this jack to connect stereo audio headphones or amplifier-equipped
speakers. Audio output from the internal speakers is disabled when head-
phones or speakers are connected to this jack.
MEMO
Volume adjustment:
Increase volume.
+
+ Decrease volume.
Names and Functions of Parts
P.23
DC-IN Connector
Insert the DC plug of the supplied AC adaptor into
DC IN 15V
this connector.
Ventilation Hole
Do not place objects near the ventilation area.
62
When the temperature of the CPU rises, this fan
begins to run, then the noise-level becomes high.
Ext. Mouse/Keyboard Port
Use this port to connect an external mouse (PS/2 type)
or keyboard. In some circumstances, if a PS/2 external
mouse with a serial interface conversion function is con-
nected to the port, it may not operate normally.
"On-Line Manual"-"Utility Programs"-"Switching
Display brightness adjustment:
+
+
Increase brightness.
(Low Middle High)
Decrease brightness.
(High Middle Low)
7