Handling the PD/CD Drive
Carefully push in the tray to the end.
mark
Slit
Insert the tool into the slit near the
shown in the diagram. Then, remove the tool.
Use the tool to turn the screw to as far as it will go in the
clockwise direction indicated.
Replace the rubber caps.
DC IN 15V
DC IN 15V
Replace the tool into the multimedia pocket device.
Turn the knob to as far as it will go in the counter-clockwise
direction.
Mount the multimedia pocket device.
Send the computer to your nearest Panasonic Service Center.
(If the PD/CD Drive Tray will not open or close)
mark and slide it as
35