Applications - Behringer XENYX 1002B User Manual

8
4.3 Battery Installation
The 1002B can be powered by three 9V batteries. This feature
allows you, for example, to capture a high-quality recording
while sitting on the beach with your laptop. You're no longer
tethered by an electrical outlet. You can still record with con-
denser mics thanks to the 18V of phantom power supplied by
two of the batteries. Follow these steps to install the batteries:
Open the battery compartment located on the underside of the
•
mixer. You will need to remove a small screw with a Phillips
screwdriver.
Slide the compartment cover out. There are slots for three bat-
•
teries inside the compartment.
Insert the batteries so that the + and – poles are in the correct
•
position.
Replace the cover and tighten the screw.
•
The battery power will last approximately four hours using high-
quality alkaline batteries.
5.

Applications

UL2000M
Fig.5.1: Field Recording
HPS5000
XENYX1002B
UCA222
XM1800S
DI100 DI100
XENYX1002B
MP3 Player
Fig.5.2: Live Small Combo
XENYX 1002B User Manual
HPS5000
F1220A
B212A B212A