Loudspeaker Connection; Applications - Behringer



europower PMP518M User Manual

EUROPOWER PMP518M
Fig. 4.2: 1/4" TRS connector
Fig. 4.3: XLR connectors
Fig. 4.4: RCA cable

4.3 Loudspeaker connection

Your EUROPOWER is equipped with high-quality Neutrik Speakon-
compatible loudspeaker connectors, which ensure safe and
trouble-free operation. The Speakon connector was especially
developed for high-power loudspeakers. Once it is plugged in, it
safely locks into position and cannot be accidentally disengaged.
It prevents the occurrence of electrical shock and ensures the
correct polarity. Each of the connectors carries only the assigned
single signal (see tab. 4.1/fig. 4.5 and the information on the rear
panel of the power mixer).
Fig. 4.5: Loudspeaker connector
8
Please be sure to only use commercial Speakon cables (type
NL4FC) for connecting your loudspeakers to the mixer. Please
check the pin connections of your loudspeakers and cables
depending on the EUROPOWER speaker output you choose.
VUQVUÃ
H6DIÃH I
Tab. 4.1: Pin connections of the professional loudspeaker

5. APPLICATIONS

This illustration shows just one example of how the channels of
your power mixer can be used, including the connection of mono
and stereo sources, and the tape ins and outs recording the mix
signal or playing back external signals.
5. APPLICATIONS
@VS Q X@SÃQHQ$ 'H
1+ 1- 2+
POS NEG POS
connector
Fig. 5.1: Standard set-up
2-
NEG