Applications; Recording Studio - Behringer XENYX 1202FX User Manual

Premium 12/10 input 2-bus mixers with xenyx mic preamps, british eqs and multi-fx processor
Hide thumbs Also See for XENYX 1202FX:
Table of Contents

Advertisement

10
XENYX 1202FX/1002FX User Manual

3. Applications

3.1 Recording studio

UMX490
B-2 PRO
V-AMP 3
Electric guitar
XENYX 1002FX
Fig. 3.1: The 1002FX in a recording studio
Even though most of the tasks in a studio can nowadays be accomplished using
a computer, a mixing console remains an unavoidable piece of equipment that
lets you effectively manage audio inputs and outputs: microphone signals need
to be pre-amplified prior to being recorded, and the quality of microphone
sound is often worked on; recording and playback signals must be routed to the
appropriate connectors or integrated into the mix; the volume of headphones
and studio monitors needs to be adjusted, and so on. The extensively equipped
main section of the XENYX mixing consoles provides concrete benefits to you.
Wiring:
Connect your sound sources to the microphone/line inputs of the mixing
console. Connect the master machine (DAT/minidisk recorder) to the
main outputs. Your monitor speakers are connected to the control room
outputs; the headphones are connected to the headphone output.
Now, connect the CD/tape outputs to the sound card inputs on your DAW
(Digital Audio Workstation). Connect the outputs of the sound card in your
computer to the CD/tape inputs.
MIDI sound module
HPS3000
GAIN
GAIN
Recording and playback:
Once in the mixing console, the recording signal is pre-amplified, EQ'ed and is
then routed to the main bus. Use the LEVEL control to adjust the recording signal
level. The overall level of the signal going to the computer is adjusted using
the MAIN MIX fader. To make sure that the signal is actually being recorded,
use either the phones bus or the control room bus to monitor not the main
mix signal (i.e. the output signal of the mixing console, before the recording);
instead, monitor the returns of the sound card that is connected to the CD/tape
inputs. To this end, press the CD/TAPE TO CTRL switch and adjust the monitoring
volume using the PHONES/CONTROL ROOM control. Doing so, you can record
additional tracks in addition to a signal already brought in (so-called overdubs).
Use the direct monitoring function of your DAW.
With this application, the CD/TAPE TO MIX switch should not be
pressed; otherwise, the playback signal from the sound card output
would be routed back to the computer and would be added to the
recording. This would not only be undesirable, it would also create a
feedback loop.
CD Player
MD Recorder
TRUTH B2030A
Digital Audio
Workstation

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xenyx 1002fx

Table of Contents