Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AVLink YX-1042
Summary of Contents for AVLink YX-1042
- Page 1 User Manual YX-1042 YPbPr Matrix Switching System...
- Page 2 YX-1042 Matrix Switching System—User Manual Before You Use the System 1、Read manual——Carefully read the manual before you use the system. 2、Installation environment——The system should be installed indoor only. Install either on a sturdy rack or desk in a well-ventilated place.
-
Page 3: Matrix System Overview
1.0 Matrix System Overview 1.0.1 YX Matrix System The YX-1042 Matrix switcher is a high performance switching equipment for audio/video frequencies. It is used for multiple input/output cross switching of audio/video signals. It provides independent YPbPr component and audio input/output terminals. Each YPbPr... -
Page 4: Front Panels
6pcs 2.0 YX Matrix Host Installation The YX-1042 Matrix Host has a black metallic housing. It can be placed on a sturdy desk or installed on a 19-in rack. See Figure 2-1 below: Figure 2-1 Installing the YX-1042 Matrix Host on a Standard Rack 3.0 YX Matrix System Front/Rear Panels... -
Page 5: Rear Panels
6. Stereo Unbalanced Audio Output 2 7. Digital Optical Audio Output 2 8. Video Output 1 9. Stereo Unbalanced Audio Output 1 10. Digital Optical Audio Output 1 4.0 YX Matrix and Peripherals Connection Figure 4-1 YX-1042 Matrix System Connection... -
Page 6: Input/Output Jacks
YX-1042 Matrix Switching System—User Manual 4.0.1 Input/Output Jacks The video signal input/output jacks of YX-1042 are formed by the 4 and 2 rows RCA female connectors. The connectors from top to bottom are: Audio Signal Jack. Y, Pb/Cb, Pr/Cr.The Y signal jack is green, the Pb/Cb signal jacks are blue, the Pr/Cr signal jacks are red and the left row audio jacks are red (right audio channel) and the right row audio jacks are white (left audio channel) and the digital optical module. - Page 7 RCA connector of the YX matrix input terminal, and also connect the RCA connectors of the YX-1042 matrix output terminal to the RCA input connectors of the output equipment via a dedicated RCA signal cable.
-
Page 8: Installation
Before the installation, make sure the peripherals of all DVDs are grounded properly and turned off. 1. Connect the YX-1042 video input RCA connector with RCA Video male to male cable from DVD players. 2. Connect the YX-1042 audio input RCA connector with RCA audio cable from DVD players. - Page 9 YX-1042 Matrix Switching System—User Manual 5.0.3 Remote Controller Key Operation Push bottom 1, the output of OUTPUT 1 is the input of the first port and the upper bottom 1 on the front panel will light. Push bottom 2, the output of OUTPUT 1 is the input of the second port and the upper bottom 2 on the front panel will light.
-
Page 10: Common Problems And Solutions
YX-1042 Matrix Switching System—User Manual 6.0 YX Matrix System Technical Parameters Model YX-1042 Technical Parameters Video Enhancement Bandwidth 150MHz (-3dB), Full Load Max. Transmission Delay 20nS(±1nS) Switching Speed 40nS(Longest Time) Signal Type Component/Composite Video Video Input Connector 4 Set RCA Female Connectors Video Input Impedance 75Ω... - Page 11 YX-1042 Matrix Switching System—User Manual Answer: Ghosting is often caused either by the projector, inferior cable quality or long transmission distance. You are advised to adjust the projector or replace with better quality cable. 4. What to do if loss of color reproduction happens or no video signal output? Answer: Please check if connectors at both ends of the YPbPr signal cable are correctly connected.
Need help?
Do you have a question about the YX-1042 and is the answer not in the manual?
Questions and answers