AVLink HX-1522W User Manual

2*2 HDMI MATRIX
HX-1522W
U M
SER ANUAL
HX-1522W
Package Contents-
1x HX-1522W Unit
1x User Manual
1x Power Adapter DC 12V with Lock
1x Remote Controller with Battery
2x Screws
4x Foot Pads
Anything missed, please contact with your vendor.
Features
2 HDMI inputs and 2 HDMI outputs matrix
Support high-resolution display up to 4Kx2K@60Hz
(YCbCr 4:2:0 8/10/12/16-bit, RGB/ YCbCr444 only
8-bit)
Supports 3D pass-through
HDCP2.2/HDCP1.4 Compliant
EDID Copy from OUT port 1
Supports IR remote control
Supports RS-232 control
All manuals and user guides at all-guides.com
Specifications
Function
HDMI In
Connector
HDMI Out
Connector
IR In
RS-232 Port 9 Pin Female D Type Connector
9600 bps; 8 data bits, 1 stop bit,
Baud Rate
Max. Resolution
Power Adapter
(Min.)
Housing
Dimensions
(LxWxH)
Weight
FRONT VIEW
V1.0
1. HDMI IN1
2. HDMI IN2
3. IR IN
REAR VIEW
1. DC JACK
2. RS-232
3. HDMI OUT2
4. HDMI OUT1
-1-
HX-1522W
HDMI A-Type Female x 2
HDMI A-Type Female x 2
3.5ψ Stereo Jack x 1
no parity
4K x 2K
DC 12V with Lock
Metal
150 x 80 x 25 mm
294g
-2-
TOP VIEW
1. TACK SWITCH
2. LED
3. IR2
Installation
1. Turn off the HDMI source and HDMI display.
2. Connect the HDMI cable between the HDMI source and
the "HDMI IN1 or IN2" port of HX-1522W.
3. Connect the HDMI cable between the HDMI display and
the "HDMI OUT1 or OUT2" port of HX-1522W.
4. Turn on the HDMI source and display.
5. Select source by TACK SW, IR or RS-232
Operation
1. Key button Of Top Unit
Press OUT1 Key: Change Output1 Link Input Port
Press OUT2 Key: Change Output2 Link Input Port
2. Remote Controller
Press Key "1" : Change Output1 Link Input Port
Press Key "2" : Change Output2 Link Input Port