Renault velSatis General Information Manual page 17

ENGINE AND GEARBOX VALUES AND SETTINGS
07A
Accessories belt tensioning
G9T ENGINE
REMOVAL
Put the vehicle on a two-post lift.
Disconnect the battery.
Remove:
– the engine covers,
– the front right wheel,
– the side protection.
Special notes for removing the accessories belt
Pivot the auto tensioner to the left using a spanner to loosen the belt. Lock
the tension wheel by putting a 4 mm Allen key in the hole (1).
REFITTING
NOTE: never refit a belt once it has been removed, but replace it.
Refitting is the reverse of removal.
Connect the battery and carry out the necessary programming.
07A-3
Edition 2