Flying shuttle box switch
To ensure proper operation please ensure that the LCD monitor and the flying shuttle box are properly
Note:
plugged to the power and the flying shuttle box switch is turned on.
1.5.2 Using the USB connectors, headphone, microphone connectors on the
flying shuttle box
1. Connect to the USB connector on the rear panel connector of the computer with USB cable.
2. Connect the power adapter and plug the switch to the power on.
3. The USB connectors on the flying shuttle box have limited power. Please do not use high power USB
devices like USB hard disks in all the ports at the same time.
1.5.3 Using the flying shuttle box
Models configured with LCD monitors have a flying shuttle box beneath the monitor that can used to start
Windows programs. After the system has booted and the Lenovo Navigator program has started this
function is available.
12
Lenovo 3000 Q Series User Manual
Headphone, Microphone connector
USB HUB
Build in microphone