Table of Contents
Advertisement
Specifications
Interface-Serial
Interface-Parallel
Character Buffering
Print Method
Character Matrix
Character Spacing
Line Feed Spacing
Print Speed
AC Voltage
DC Voltage
External Dimensions
Operating Temp.
4
Available baud rates:
300, 600, 1200, 2400, 4800, 9600, 19200
Voltage levels:
RS-232C: -9 Volts to + 9 Volts
TTL: 0 Volts to + 5 Volts
20mA current loop
RS-485: 200mV differential
Character format:
Standard ASCII character set—10 or 11 bits per
character, 7 or 8 data bits.
Even or odd parity selection for 7 data bits.
Bit mapped graphics—10 bits per character
required
Busy signal - Clear to Send (CTS) or XON-XOFF
36-pin Centronics
1.5K standard
8K optional
Approximately 9500 byte capacity with option in-
stalled.
Impact dot matrix
5 x 8 or 5 x 5
24 column:
32 column:
40 column:
7.6 lines per inch, character mode
9.1 lines per inch, graphic mode
38 lines per minute for 24 column
33 lines per minute for 32 and 40 column
Paper
Table top:
Panel mount:
Power
1 Watts (idle), 10 Watts (while printing)
9 VAC (120 VAC stepdown converter included)
Multi-national converters optional
Optional 9-12 VDC
100mA idle, 1500mA with 100% printing, 2.9A peak
with 100% printing
4.1"W x 4.5"L x 2"H
5°C to 40°C, 41°F to 104°F
Model 122X MiniPrinter User's Manual
12.8 characters/inch
17 characters/inch
21 characters/inch
2.25"W x 2.75"D; 0.44" I.D.
2.25"W x 1.25"D
Advertisement
Table of Contents
