D-Link DSL-2880AL User Manual page 37

Section 3 - Configuration
WIRELESS SECURITY MODE – WPA-Personal
Use WPA or WPA2 mode to achieve a balance of strong security and best
compatibility. This mode uses WPA for legacy clients while maintaining
higher security with stations that are WPA2 capable. Also the strongest
cipher that the client supports will be used. For best security, use WPA2
mode. This mode uses AES (CCMP) cipher and legacy stations are not
allowed access with WPA security. For maximum compatibility, use WPA.
This mode uses TKIP cipher. Some gaming and legacy devices work only
in this mode.
Choose WPA / WPA2 / Auto(WPA or WPA2) on the WPA Mode
Type the value seconds on the Group Key Update Interval. The default
value is 1800.
WPA / WPA2 -PSK (Personal)
Type the string on the Pre-Shared Key
Click the Apply Settings button to save the configuration.
D-Link DSL-2880AL User Manual 37