Epson PowerLite Home Cinema 705HD Quick Setup Manual page 31

2. Connect the USB drive or the flat end of the USB cable to the
USB
TypeA
Connecting a
thumb drive
3. Connect the other end of the cable to your camera or other
device, if necessary.
The indicator light on the projector turns orange and then green
when a USB device is connected.
4. If you are not connected to another image source, the Slideshow
program appears.
If you are connected to another image source, press the
button on the remote control to go to the Slideshow program.
See page 42 for instructions on controlling the slideshow.
5. When you're finished, press
Slideshow before turning off or removing the USB device.
Be sure to turn off your USB device (if necessary) before you remove
the device or cable from the projector. Failure to do so may damage
the device and/or the projector.
port on the projector, as shown.
and select
Esc
Connecting a
digital camera
USB
to exit the
Exit
Indicator light
caution
Do not remove the device
when the indicator light is
flashing or on, or the
Slideshow program is
running, or you may
damage the device or
projector.
Setting Up the Projector
29