Adjusting The Playback Volume; Slideshow - BenQ LR100 Series User Manual

Adjusting the playback volume

Increase or decrease the volume of video clips, audio clips, or voice memos.
To adjust the playback volume:
1. In mode, press
Playback
voice memo that you want to playback.
2. Adjust the volume.
• Slide the
Zoom
• Slide the
Zoom
The volume can be set during playback, but not during rewind, fast forward, or
pause.

Slideshow

Sets the time interval for presenting a series of captured image and video files
(first frame only).
To play a slideshow:
1. In mode, press
Playback
2. Change the slideshow settings.
• Press or
Applies a transition effect from left to right.
•
• Applies a transition effect from upper-left side to lower-right side.
• Applies a horizontal transition effect.
• Applies a vertical transition effect.
• Applies a horizontal transition effect by intersecting an image.
• You can set the interval between 1/3/5/10 seconds.
3. Select whether you want to repeat the slideshow.
4. Select and press
Start
If you want to pause it at any time, press
stop the slideshow, press
or
lever to to increase the volume.
lever to to decrease the volume.
>
to set one of the following slideshow effects:
to play the slideshow.
.
to select a video clip, audio clip, or
>
Slideshow
. Press again to resume playback. To
Playback mode 55
> or .