Advertisement
using the remote control
This page explains how to use the C24 remote control to
operate the SPA23, and how to fit the batteries into the remote
control.
f i t t i n g t h e b A t t e r i e s
Before using the remote control you need to insert
the two button cells supplied with the C24.
•
Open the cover on the back of the remote
control by pressing the tab gently:
•
Insert the two batteries, positive side uppermost:
•
Replace the cover and push until it clips into place.
Note: Replace only with 3V button cells
type CR2025 or equivalent.
When disposing of old batteries please be considerate
to the environment.
Press briefly to
mute the sound
Select SPA23 mode
Move left on settings menu
Edit item on settings menu
Increase the volume
Decrease the volume
Display the settings menus
Change the surround mode
s P A 2 3 u s e r g u i d e
Switch on/off
Select an input
Press +10 first to select an input > 9
Select next input, increase level,
or move up on settings menu
Move right on settings menu
Select previous input, reduce level,
or move down on settings menu
Control the CD player
Change the balance or levels
Change the display brightness
7
Advertisement
