Advertisement
m e m o r y
The MEMORY menu allows you to save and
recall the SPA23 settings, or restore the factory
settings.
Saving installer settings
Once you have configured the SPA23 you can
save the settings in a password-protected file, and
then recall them at any time to restore the SPA23
to your custom configuration.
•
Select SAVE INST. SETTINGS from the
MEMORY menu.
•
Enter the password using the number keys (or
A, V, <, and >
) on the remote, then press @
on the front panel or SETUP on the remote
control.
If you have successfully saved the settings you will
be returned to the MEMORY menu..
Recalling installer settings
You can recall the installer settings at any time:
•
On the MEMORY menu select RECALL
INST. SETTINGS, then select YES
The SPA23 will restart with the new configuration.
Changing the installer password
To change the installer password:
•
Highlight CHANGE INST. PASSWORD,
then press @ on the front panel or SETUP
on the remote control.
•
Enter the old password using the number
keys (or
A, V, <, and >
) on the remote, then
press @ on the front panel or SETUP on the
remote control.
The screen will prompt PLEASE ENTER
YOUR NEW PASSWORD TWICE.
•
Enter the new password and press @ on the
front panel or SETUP on the remote control.
•
Enter the new password again and press @
on the front panel or SETUP on the remote
control.
If you have successfully changed the password you
will be returned to the MEMORY menu..
s P A 2 3 u s e r g u i d e
1 2
Advertisement
