Remote Control; Resetting The Microcomputer; Operation Manual - Sharp CD-BK2100V Service Manual

CD-BK2100V

Remote control

1. Remote Control Transmitter LED
2. Echo Level Up/Down Buttons
3. Karaoke Mode Button
4. Vocal Replacer Button
5. (VCD) VCD Auto/On Button
6. (VCD) Playback Control Auto/Off Button
7. (VCD) On Screen Display On/Off Button
8. On/Stand-by Button
9. (VCD) Direct Search Button
10. (VCD) Digest/Time Search Button
11. (VCD/CD) Clear Button
12. (VCD/CD) Memory Button
13. (VCD/CD) Disc Skip Button
14. (VCD) Skip/Previous Button
(CD) Track Down/Review Button
(TUNER) Preset Down Button
(TAPE 2) Fast Wind Button
15. (VCD) Bookmark Button
16. (TAPE 2) Reverse Play Button
17. (VCD) PAL/NTSC Select Button
18. (TAPE 2) Record Pause Button
19. Function Selector Buttons
20. (VCD/CD) Random Button
21. (VCD/CD) Pause Button
22. (VCD) Skip/Next Button
(CD) Track Up/Cue Button
(TUNER) Preset Up Button
(TAPE 2) Fast Forward Button
23. (VCD) Play/Repeat/Select/Resume Button
(CD) Play/Repeat Button
(TAPE 1) Play Button
(TAPE 2) Fast Wind Button
24. (VCD) Stop/Return Button
(CD/TAPE) Stop Button
25. Extra Bass Button
26. Equalizer Mode Selector Button
27. Volume Up/Down Buttons
0.2 m - 6 m
(8" - 20')
Notes concerning use:
Replace the batteries if the operating distance is reduced
or if the operation becomes erratic.
Periodically clean the transmitter LED on the remote con-
trol and the sensor on the main unit with a soft cloth.
Exposing the sensor on the main unit to strong light may
interfere with operation. Change the lighting or the direc-
tion of the unit.
Keep the remote control away from moisture, excessive
heat, shock, and vibrations.
14
15
16
17
18
19

OPERATION MANUAL

RESETTING THE MICROCOMPUTER

Reset the microcomputer under the following condi-
tions:
1
2
Caution:
– 6 –
1
2
3
4
5
6
7
10 11 12 13
To erase all of the stored memory contents (clock and
timer settings, and tuner and CD presets).
If the display is not correct.
If the operation is not correct.
Press the ON/STAND-BY button to enter the stand-
by mode.
Whilst pressing down the
DEMO button, hold down the ON/STAND-BY button
for at least 1 second.
"CLEAR AL" will appear.
2
1
The operation explained above will erase all data stored
in memory including clock and timer settings, and tuner
and CD presets.
8
9
20
21
22
23
24
25
26
27
button and the X-BASS/