4.6.1 WPS: PBC (Push Button Configuration)
This screen allows you to use the WPS Push Button Configuration mode. See
28
for more information. Select WPS and PBC (Push Button Configuration) in the Adapter
screen. The following screen displays.
Figure 39 WPS: PBC (Push Button Configuration)
Press Start when you want to begin the WPS process. You must also press the button on the other
device within two minutes.
4.6.2 WPS: PIN - Use this Device's PIN
This screen allows you to use the WPS Personal Identification Number mode, by entering the
NWD2705's unique PIN in the configuration utility of the other WPS-enabled device. See
3.4.2 on page 29
Adapter screen. The following screen displays.
Figure 40 WPS: PIN - Use this Device's PIN
NWD2705 User's Guide
for more information. Select WPS and PIN - Use this Device's PIN in the
Chapter 4 ZyXEL Utility: Station Mode
Section 3.4.1 on page
Section
49