Troubleshooting; How To Use Pppoe Ia On The Switch - ZyXEL Communications MES3500-24F User Manual

Chapter 6 Tutorials
Click Apply to save your changes back to the run-time memory.
5
Click the Save link in the upper right corner of the web configurator to save your configuration
6
permanently.
The DHCP server can then assign a specific IP address based on the DHCP request.
7

6.2.4 Troubleshooting

Check the client A's IP address. If it did not receive the IP address 172.16.1.18, make sure:
Client A is connected to the Switch's port 2 in VLAN 102.
1
You configured the correct VLAN ID, port number and system name for DHCP relay on both the
2
DHCP server and the Switch.
You clicked the Save link on the Switch to have your settings take effect.
3

6.3 How to Use PPPoE IA on the Switch

You want to configure PPPoE Intermediate Agent on the Switch (A) to pass a subscriber's
information to a PPPoE server (S). There is another switch (B) between switch A and server S.
60
MES3500-24/24F User's Guide