Installation of Storage Tank
Apply Teflon tape in a clockwise direction around the
Step 15
male pipe threads on the tank.
Thread the ball valve (supplied in the parts bag)
onto the stainless steel connector on the tank.
Note: Do not over tighten plastics connections.
Step 17
parts bag) into the ball valve attached to the tank.
Step 16
Connecting the Tank
Step 18
u p r i g h t o r u s i n g b l a c k p l a s t i c s t a n d l a y i t o n i t ' s s i d e. Connect
remaining blue tube from he RO module
over to the tank ball valve connector.
Step 19
Push blue tube into the connector on the
end of ball valve until it stops. Use a wrench
to securely tighten the nut on the connector.
T h r e a d 1 / 4 " p l a s t i c c o n n e c t o r f i t t i n g ( s u p p l i e d i n t h e
Postion the tank in the desired location. Stand it
7