Table of Contents
Advertisement
Adjust Faucet
If the faucet has developed a drip it can be corrected by following the steps outlined below.
Step 1
Step 2
Lever will slide forward and completely off of the faucet base.
Step 3
Small brass tee can be turned 1/2 turn, counterclockwise, to adjust the
tension on the black lever. This adjustment may be necessary to stop
slow drips from tip of faucet. You may need to repeat the process until
the faucet does not drip. Brass tee must always end up facing across
body of faucet in order to slide black lever on.
Remove faucet Spout first. Position both thumbs on the
back edge of the lever and push forward.
12
Advertisement
Table of Contents
