HP Integrity BL870C i2 Specifications page 2

QuickSpecs
Overview
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
The HP Integrity BL870c i2 delivers the performance, reliability, and availability on 64-bit operating systems (HP-UX 11i v3, Microsoft
Windows® Server 2008 for Itanium-based systems and OpenVMS v8.4) for the ultimate in scalability and flexibility in deployment: To
further enrich your cost-efficient, consolidated Integrity blade infrastructure, HP Insight Dynamics - VSE for HP Integrity servers can
help with solution components such as HP-UX Virtual Partitions (vPars) v6.0, HP Integrity Virtual Machines, HP Capacity Advisor and
Virtualization Manager, HP Global Workload Manager and HP-UX Workload Manager, HP Insight Dynamics - VSE infrastructure
orchestration HP Insight Dynamics - VSE Reference Architectures, and HP Serviceguard.
HP Integrity BL870c i2 server blade includes:
Processor:
Up to four Intel® Itanium® 9300 Series processors
Memory:
Up to 768 GB of memory. Supporting (48) DDR3 registered memory modules (R-DIMMs)
Storage Controller:
Two (2) Embedded HP p410i SAS RAID Controllers integrated on system board
RAID 1, RAID 0, and HBA mode configuration options
Internal Drive Support:
Supports up to (4) four small form factor (SFF) SAS hot plug hard drives
Network Controller:
Eight (8) NIC ports via four (4) embeddedNC532i Dual Port Flex-10 Multifunction Server Adapters
NOTE: Flex-10 capability requires OS drivers and the use of an HP Virtual Connect Flex-10 10GbE Ethernet module. Learn
more at: www.hp.com/go/virtualconnect
NOTE: BL8x0c i2 server blades require Virtual Connect 3.00 or later when used in Virtual Connect configurations
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class interconnect
components
Plus one (1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
Mezzanine Support:
Six (6) additional I/O expansion slots via mezzanine cards.
Supports up to (6) mezzanine cards
HP NC553m Dual Port 10Gb FlexFabric Adapter
HP NC551m Dual Port 10Gb FlexFabric Adapter
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
HP NC532m Dual Port Flex-10 10GbE BL-c Adapter
HP Emulex LPe1205 8Gb FC BL-c HBA (2-port 8Gb Emulex FC HBA)
HP QMH 2562 8Gb FC BL-c HBA (2-port 8Gb QLogic FC HBA)
HP Smart Array P711m/1G FBWC Controller
HP Smart Array P700m/512 Controller
HP 4X QDR IB CX-2 Dual Port Mezz HCA for HP BladeSystem c-Class
HP NC364m 4-port 1GbE BLc Adapter
HP NC360m 2-port 1GbE BLc Adapter
USB Support:
Two (2) Internal USB ports on the BL870c i2
DA - 13620 Worldwide — Version 18 — December 10, 2013
HP Integrity BL870c i2 Server Blade
Page 2