HP 5500 EI series Specifications page 26

QuickSpecs
Technical Specifications
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Frequency
Safety
Emissions
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Supports a maximum of 24 autosensing 10/100/1000 ports
Dimensions
Weight
256 MB SDRAM, 32 MB flash; packet buffer size: 2 MB
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching
capacity
Routing table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
Maximum heat
dissipation
Voltage
DC Voltage
Maximum power rating
PoE power
Notes
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-
4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-
3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
DA - 13808 North America — Version 27 — January 16, 2014
17.32(w) x 16.54(d) x 1.69(h) in (43.99 x 42.01 x 4.29 cm) (1U height)
13.23 lb (6 kg)
< 3.2 µs
< 2.6 µs
107.2 million pps
144 Gb/s
12000 entries (IPv4)
32ºF to 113ºF (0ºC to 45ºC)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
ISO 7779
50/60 Hz
700 BTU/hr (738.5 kJ/hr)
100-240 VAC
52 to -55 VDC
575 W
370 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated. PoE power is the power supplied by the internal power
supply. It is dependent on the type and quantity of power supplies and may be
supplemented with the use of an external power supply (EPS).
With DC input, the maximum power consumption is 485 W; PoE is 370 W.
HP 5500 EI Switch Series
Page 26