Configuration Information - HP 3PAR StoreServ 7000 Specifications

QuickSpecs

Configuration Information

Step 1 - Choose a Base configuration
HP 3PAR StoreServ 7000 configurations start with the selection of the Base. The Base includes controller nodes, bays for small form
factor drives, and PCIe slots for host adapter cards. SAN Kits are also considered base configurations. The SAN Kits simplify ordering
for SAN configurations with the array and extend the switch warranty to 3-years by including switches with an HP 3PAR StoreServ
7000 Storage Base.
HP 3PAR StoreServ 7000 Base Configurations
HP 3PAR StoreServ 7200 2-node Storage Base
HP 3PAR StoreServ 7400 2-node Storage Base
HP 3PAR StoreServ 7400 4-node Storage Base
HP 3PAR StoreServ 7200 2-node Storage Base for Storage Centric
HP 3PAR StoreServ 7400 2-node Storage Base for Storage Centric
HP 3PAR StoreServ 7400 4-node Storage Base for Storage Centric
HP 3PAR StoreServ 7200 8Gb H-series Base System SAN Kit
HP 3PAR StoreServ 7200 16Gb Virtualization Base System SAN Kit
HP 3PAR StoreServ 7400 16Gb Virtualization Base System SAN Kit
A minimum of one (1) configuration base must be ordered.
The HP 3PAR StoreServ 7200 base configuration includes (2) controller nodes, 24
GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC ports, (4)
8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter cards - one slot
per node, (4) 2m SAS cables, (1) mounting rail kit, and power cords.
The HP 3PAR StoreServ 7400 2-node base configuration includes (2) controller
nodes, 32 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC
ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter cards -
one slot per node, (4) 2m SAS cables, (2) 1U rack filler panels to reserve 2U of
rack space above the 2-node Storage Base for a future upgrade to a 4-node
configuration, (1) mounting rail kit, and power cords.
The HP 3PAR StoreServ 7400 4-node base configuration includes (4) controller
nodes, 64 GB of cache, (48) small form factor drive bays, (8) built-in 8 Gb/sec FC
ports, (8) 8Gb shortwave FC SFP, (4) PCIe adapter slots for host adapter cards -
one slot per node, (8) 2m SAS cables, (4) node link cables, (2) mounting rail kits,
and power cords.
The HP 3PAR StoreServ 7200 8Gb H-Series Base System SAN Kit includes the
QR482A HP 3PAR StoreServ 7200 2-node Storage Base, (2) BK780B HP SN6000
Stackable 8 Gb/s 8 Active Port Single Power Supply FC Switches and (4) TA821A
4-port FC Switch Upgrade LTUs. Each switch comes with serial cable, mounting
rail kits, power cords, and SAN Connection Manager software entitlement. Also
included is a 3 year warranty for the switches.
NOTE: Requires optical transceivers and switch cabling which must be supplied
separately.
The HP 3PAR StoreServ 7200 16Gb Virtualization Base System SAN Kit includes
the HP 3PAR StoreServ 7200 2-node Storage Base and (2) QK753B HP SN6000B
16 Gb/s 48-port/24-port Active FC Switches - dual power. Each switch comes
with rack mount kit (including rails, mounting hardware, and plenum), RJ-45
serial cable with adaptor for RJ-45 to DB9, power cords, and SAN Network
Advisor DVD. Also included is a 3 year warranty for the switches.
DA - 14433 North America — Version 18 — January 17, 2014
HP 3PAR StoreServ 7000 Storage
Rack*
Rack*
Rack*
QR482A
QR483A
QR485A
E7W49A
E7W50A
E7W51A
QR488A
QR489A
QR510A
Page 9