HP 3PAR StoreServ 7000 Specifications page 18

QuickSpecs
Configuration Information
The HP 3PAR StoreServ 7000 is compatible with most industry standard 4-post EIA 19 inch racks with square mounting holes, including
the HP Intelligent Series Rack and the HP 10000 G2 Series Rack. The HP 3PAR StoreServ 7000 can be factory configured and shipped in
a rack or shipped without a rack for field integration into an existing rack. The rack used for factory integration is the HP Intelligent
Series Rack.
HP Rack and Rack Options
Factory Integration
Primary Configuration
Rules
HP Intelligent Series
Racks
HP PDU Pivot Kit
Performance Optimized
Data Centers
Select a rack to house your HP 3PAR StoreServ 7000.
NOTE: The HP Intelligent Series Rack is the only series supported for factory
configuration.
The HP 3PAR StoreServ 7000 will be configured into an HP Intelligent Series Rack with
the appropriate power distribution units (PDUs). If other products such as servers or
back-up products are included in the cab, a different PDU will be added (if required) or
can be chosen from a list of appropriate offerings shown in the configuration tool. The
HP Intelligent Series Rack must be purchased for factory configuration. Additional 3PAR
StoreServ 7000 controller node enclosures and drive enclosures may be ordered for
multiple subsystem integration at the factory.
The 3PAR StoreServ 7000 is also supported in HP 10000 G2 Series racks for field
installation.
When calculating available U-space, assume that no space will be placed between the
mounted components. For redundancy, order PDUs in quantities of two. Refer to the
Configuration and User Guide in the Information Library at the Rack Solutions webpage.
NOTE: The number of components that will fit in a rack varies and is determined by the
interior U-space of the rack.
HP 647 1075mm Shock Intelligent Series Rack
HP 47U 1075mm Side Panel Kit
HP 642 1075mm Shock Intelligent Series Rack
HP 42U 1075mm Side Panel Kit
HP 636 1075mm Shock Intelligent Series Rack
HP 36U 1075mm Side Panel Kit
For more information on the HP rack offerings, please see the following URL:
http://h18004.www1.hp.com/products/servers/platforms/rackandpower.html.
For more information on rack options, see: http://www.hp.com/products/rackoptions.
For more information on PDUs, see:
http://h18004.www1.hp.com/products/servers/proliantstorage/power-
protection/pdu.html.
HP EVA PDU Pivot Kit
Used to reclaim 2U of space in an HP Intelligent Series Rack with HP 3PAR StoreServ
7000 configurations. This kit allows the PDUs to be placed in the back of the rack
without requiring any rack U space.
NOTE: The use of the PDU Pivot Kit is strongly recommended and is the default option
when orders are configured, as it will save 2U of valuable rack space.
NOTE: 0D1 will appear after this part number to indicate factory integration where
appropriate.
HP 3PAR StoreServ 7000 Storage is qualified for use in HP Performance Optimized Data
Centers. Go to www.hp.com/go/POD
DA - 14433 North America — Version 18 — January 17, 2014
HP 3PAR StoreServ 7000 Storage
for more information.
BW912A
BW915A
BW904A
BW906A
BW896A
BW898A
AG730A
Page 18