Casio DT-300M60E User Manual page 24

Using the Bridge Satellite Cradle
4
Turn on the power switch.
The power indicator LED lights red.
5
Place the infrared interface port on the
Handheld Terminal and the infrared interface
port on the Bridge Satellite Cradle so that they
are in direct contact.
The power indicator LED on the Bridge
Satellite Cradle lights green.
· If the system is operating correctly, and it
goes into transmission status, then the
system operation LED flashes green.
Important! • The infrared communication function uses highly sensitive
• Do not let the Bridge Satellite Cradle power terminal to short. The
• Bending the cables excessively when connecting them to the Bridge
E-26
transmission elements.
For optimum communication performance, avoid using any devices
that emit radio waves (such as cellular phones) near the Bridge
Satellite Cradle when it is transmitting data. If you need to use this
kind of device, keep it away from the Bridge Satellite Cradle (at least 30
cm for cellular phones).
Bridge Satellite Cradle may be damaged if it shorts.
Satellite Cradle may cause the set up to be unstable. (Particularly if the
RS-232C cable is bent directly next to the Bridge Satellite Cradle. If this
happens, use the cable grips (included in the package) to hold the
cables.
Power supply
terminal
System operation LED
Communicating LED
Power LED
Power switch is on