Table of Contents
Advertisement
General Guide
<Top>
<Bottom>
1
Reader port
2
Read indicator LED
3
LCD screen
4
Read key
5
Stroke key
6
Reset button (inside hole)
7
Wrist strap hook
8
Laser warning label
9
Buzzer
10 Main battery compartment
11 Main battery compartment lock Locks the main battery compartment cover in place. Handheld
12 Power terminal
13 Infrared interface port
* The indicator must be set for the red indicator to light.
E-12
<Front>
9
1
7
13
Emits a laser that reads bar codes
Indicates the status of the read operation: green for a successful
read, red for an unsuccessful read. *
Displays information about the programs being run.
Pressing this key activates the bar code reader.
A total of 18 keys are provided for operations and to turn the power
on and off.
Use a paper clip or other thin object to press the Reset button
located inside the hole to initialize the internal status of the
Handheld Terminal.
Hook for attaching the wrist strap.
Class 2 laser warning label
Produces operation confirmation tones. Take care to avoid
blocking the buzzer holes and reducing output sound volume. Do
not insert any thin pointed objects into the buzzer holes, as this
may cause malfunction.
Holds the main batteries.
Terminal power is automatically cut off if the cover is removed and
the power cannot be turned back on.
This terminal receives power from the Bridge Satellite Cradle.
This interface port is for contact-less infrared data communication
with another DT-300 or the Bridge Satellite Cradle.
<Right side>
2
3
4
5
7
<Back>
1
8
6
11
10
12
Advertisement
Table of Contents
