General Directions For Use; Main Components - Zibro SRE 178 E Owner's Manual

GENERAL DIRECTIONS FOR USE

Below you will find the main steps to be taken for
using your Zibro. For more details, please refer to the
MANUAL (pages 45 ff.).
1
Remove all packaging materials (Fig. A).
2
Fill the removable tank
3
Insert the plug into the wall-socket.
4
Ignite the heater using the
5
If required, change the temperature using the adjustment keys
(refer to Section E).
6
Switch off the heater by pressing the
•
The first time you ignite your heater it will smell
like 'new' for a short time.
•
Store your fuel in a cool and dark place.
•
Fuel has a limited shelf life. Start every heating
season with renewed fuel.
•
The right quality of fuel will be assured, when
you use Zibro Extra or Zibro Kristal for your heater.
•
If you change to another brand and/or type of
parrafin oil, you must first finish up all the
remaining fuel in the heater.
(refer to Section B, Fig. D).
key (refer to Section D).
key .

MAIN COMPONENTS

Front plate
Grid
Base plate
Lid for removable
tank
Operation panel
Handle
Removable tank
Air filter cap
Vent filter
Thermostat
Plug + cord
Information display
key
Childproof lock
Adjustment keys
(time and
temperature)
TIMER
SAVE key
Indicator lights
EXTENSION
Connection
weektimer
Ioniser
Air quality control
system
4
43