Getting Connected To The Internet; Adding A New Gprs/Edge/3G Connection; Turning On Wi-Fi; Connecting To A Wi-Fi Network - Zte Midnight Z768G User Manual

Getting Connected to the Internet

Your phone's impressive networking capabilities allow
you to access the Internet or your corporate network
with ease.
You can use default connection settings to connect to
the Internet via your mobile network (GPRS/EDGE/3G),
or Wi-Fi.
The GPRS/EDGE/3G connection can be enabled/disabled
manually. Just press the Menu Key > Settings >
Wireless & networks > Mobile networks from the
Home Screen and check or clear the Data enabled
check box.
Adding a New GPRS/
EDGE/3G Connection
To get connected via GPRS/EDGE/3G, you need
a data plan with your service provider. Also if the
GPRS/EDGE/3G settings are not pre-configured on
your phone, please contact your provider to get the
necessary information.
1. Press the Home Key > > Settings > Wireless
& networks > Mobile networks > Access
Point Names.
2. Press the Menu Key > New APN.
3. Tap each item to enter the information you get from
your service provider.
4. Press the Menu Key > Save to complete.
TIP: To set the APN to default settings, press the
Menu Key > Reset to default.
22

Turning On Wi-Fi

Wi-Fi is a wireless networking technology that can
provide Internet access at distances of up to 100
meters, depending on the Wi-Fi router and your
surroundings.
1. Press the Home Key > > Settings > Wireless
& networks.
2. Check the Wi-Fi box to turn it on.
Connecting to a Wi-Fi
Network
1. Press the Home Key > > Settings > Wireless
& networks > Wi-Fi settings.
The Wi-Fi network names and security settings
(open or secured) that your phone has detected are
shown in the Wi-Fi networks section.
2. Tap a network to connect to it. If the network is
secured, you need to enter a password.
Press the Menu Key > Scan in the Wi-Fi
TIP:
settings screen to scan for a Wi-Fi network manually.
Checking the Wi-Fi Network
Status
You can check the Wi-Fi network by looking at the
icon in the status bar.
Or tap the access point that the phone is currently
connected to in the Wi-Fi settings screen. You
can then check the network status from the pop-up
window.

Adding WPS Network

Wi-Fi Protected Setup (WPS) is a feature that makes
it easy to add your phone to the access points which
supply WPS.
You can use one of the following methods to connect
your phone to a wireless network using WPS.
Method one: Push button (recommended)
1. Press the Home Key > > Settings > Wireless
& networks and check Wi-Fi to turn it on.
2. Tap Wi-Fi settings > Add WPS network.
3. Tap the WPS method drop-down menu, and then
tap Push Button.
4. Tap Start. Your phone searches for the WPS
network.
5. Press the WPS button on the wireless router and the
access point will recognize your phone and add it to
the network.
Method two: PIN number
1. Press the Home Key > > Settings > Wireless
& networks and check Wi-Fi to turn it on.
2. Tap Wi-Fi settings > Add WPS network.
3. Tap the WPS method drop-down menu, and then
tap Pin Number.
4. The WPS PIN number displays on the Pin number
field. Enter the PIN number into the access point's
setup page.
Getting Connected to the Internet
5. Tap Start. Your phone automatically finds the access
point and configures the connection.
NOTE: For detailed information about the
WPS feature of access point, please refer to its
documentation.
23