For Your Safety; General Safety; Radio Frequency (Rf) Energy - Zte Midnight Z768G User Manual

Midnight
Table of Contents

Advertisement

For Your Safety

General Safety

Don't make or receive handheld calls
while driving. And never text while
driving.
Keep your phone at least 15 mm away
from your ear or body while making
calls.
Small parts may cause a choking.
Your phone can produce a loud sound.
Keep away from pacemakers and other
electronic medical devices.
Switch off when asked to in hospitals
and medical facilities.
Switch off when told to in aircrafts and
airports.
Switch off when near explosive
materials or liquids.
Don't rely on your phone for emergency
communications.
44
Don't use at gas stations.
Your phone may produce a bright or
flashing light.
Don't dispose of your phone in fire.
To prevent possible hearing damage,
do not listen at high volume levels for
long periods.
Avoid contact with anything magnetic.
Avoid extreme temperatures.
Avoid contact with liquids. Keep your
phone dry.
Don't take your phone apart.
Only use approved accessories.

Radio Frequency (RF) Energy

This model phone meets the government's requirements
for exposure to radio waves.
This phone is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission
of the United States, Industry Canada of Canada.
During SAR testing, this device is set to transmit at its
highest certified power level in all tested frequency
bands, and placed in positions that simulate RF
exposure in usage against the head with no separation,
and near the body with the separation of 0.4 inches (10
mm). Although the SAR is determined at the highest
certified power level, the actual SAR level of the device
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the closer you
are to a wireless base station antenna, the lower the
power output.
The exposure standard for wireless devices employs a
unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg,
and 1.6 W/kg by Industry Canada.
This device is compliance with SAR for general
population/ uncontrolled exposure limits in ANSI/IEEE
C95.1-1992 and Canada RSS 102, and had been tested
in accordance with the measurement methods and
For Your Safety
procedures specified in OET Bulletin 65 Supplement C,
and Canada RSS 102. This device has been tested, and
meets the FCC, IC RF exposure guidelines when tested
with the device directly contacted to the body.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
SAR information on this model phone is on file with the
FCC and can be found under the Display Grant section
of www.fcc.gov/oet/ea/fccid after searching on FCC
ID: Q78-ZTEV768.
For this device, the highest reported SAR value for
usage against the head is 1.38 W/kg, for usage near
the body is 1.44 W/kg.
While there may be differences between the SAR levels
of individual Z768G phones and at various positions,
they all meet the government requirement.
SAR compliance for body-worn operation is based on
a separation distance of 0.4 inches (10 mm) between
the unit and the human body. Carry this device at least
0.4 inches (10 mm) away from your body to ensure RF
exposure level compliant or lower to the reported level.
To support body-worn operation, choose the belt clips
or holsters, which do not contain metallic components,
to maintain a separation of 0.4 inches (10 mm)
between this device and your body.
RF exposure compliance with any body-worn accessory,
which contains metal, was not tested and certified, and
using such body-worn accessory should be avoided.
45

Advertisement

Table of Contents
loading

Table of Contents