Getting Connected To The Internet; Adding A New Gprs/Edge/3G Connection - Zte V790 User Manual

Getting Connected to the Internet

Your phone's impressive networking capabilities allow you to
access the Internet or your corporate network with ease.
You can use default connection settings to connect to the
Internet via your mobile network (GPRS/EDGE/3G), or Wi-Fi.
The GPRS/EDGE/3G connection can be enabled/disabled
manually. Just touch the Menu Key > Settings > Wireless
& networks > Mobile networks from the Home Screen
and tick or clear the Data enabled check box.
Adding a New GPRS/EDGE/3G
Connection
To get connected via GPRS/EDGE/3G you need a data plan
with your service provider. Also if the GPRS/EDGE/3G
settings are not pre-configured on your phone, please
contact your provider to get the necessary information.
1. Touch the Home Key > Menu Key > Settings >
Wireless & networks > Mobile networks > Network
Settings > Access Point Names.
2. Touch New APN.
3. Touch each item to enter the information you get from
your service provider of that SIM card.
4. Touch Save to complete.
TIP: To set the APN to default settings, touch Reset to
50