If you do not configure and activate a profile, each time you start the G-210H, the G-210H
tries to connect to any available network with security disabled.
Click the Profile tab in the ZyXEL utility program to display the Profile screen as shown next.
The profile function allows you to save the wireless network settings in this screen, or use one
of the pre-configured network profiles.
Figure 32 Windows: Profile
The following table describes the labels in this screen.
Table 14 Windows: Profile
LABEL
Profile List
,
,
or
Profile Name
SSID
Channel
Security
Network Type
Connect
G-210H User's Guide
DESCRIPTION
Click a column heading to sort the entries.
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless
security is deactivated.
This is the name of the pre-configured profile.
This is the SSID of the wireless network to which the selected profile associates.
This field displays the channel number used by the profile.
This field shows whether data encryption is activated (WEP, WPA-PSK, WPA,
OPEN - Use 802.1X, WPA2, WPA2-PSK) or inactive (DISABLE).
This field displays the network type (Infrastructure or Ad-hoc) of the profile.
To use and activate a previously saved network profile, select a pre-configured
profile name in the table and click Connect.
Chapter 4 ZyXEL Utility - Windows
47