The About Screen; Figure 43 Mac Os X: Advanced; Table 25 Mac Os X: Advanced - ZyXEL Communications G-210H User Manual

Figure 43 Mac OS X: Advanced

The following table describes the labels in this screen.

Table 25 Mac OS X: Advanced

LABEL
Wireless Mode
11 B/G Protection
TX Rate
Enable Tx Burst
Adhoc mode use
of OFDM rate
Apply

5.9 The About Screen

Use this screen to view the driver and utility version and the MAC address of your G-210H.
G-210H User's Guide
DESCRIPTION
Select 802.11b Only to allow only IEEE 802.11b compliant wireless devices to
associate with the G-210H.
Select 802.11b+g to allow both IEEE 802.11b and IEEE 802.11g compliant
wireless devices to associate with the G-210H. The transmission rate of your G-
210H will drop to a speed supported by IEEE 802.11b.
11 B/G Protection is used in a mixed IEEE 802.11b and g network to check
whether IEEE 802.11g traffic from the G-210H has been received by IEEE
802.11b compatible devices on your network.
Choose Auto to set the G-210H to dynamically use 11 B/G Protection depending
on the network environment.
Choose On to always apply 11 B/G Protection.
Choose Off to disable this feature.
Set a maximum transmission rate from the drop-down list from 1 Mbps to 54 Mbps,
or select Auto to allow the G-210H to set a rate based on network conditions.
Select this box to allow the G-210H to send short-lasting higher rates of
transmission (called bursts) to improve the quality of transmission.
Select this to improve throughput in Ad-hoc mode.
Click this to save your settings on to the G-210H.
Chapter 5 ZyXEL Utility - Mac OS X
61