Table of Contents
Advertisement
PCMCIA Wireless LAN Card User's Manual
NOTE: In most cases, Windows will automatically copy all of the files needed for
networking. If Windows asks you for the files and prompts you to input the path to the
files. Follow the instructions on your screen, and then click OK to continue.
Driver installation for Windows NT4.0
This installation procedure assumes that you have installed the network component on
your computer.
To check whether the network component has been installed, double click the Network
icon in the Control Panel. If it has not been installed, refer to the Windows NT 4.0
installation guide for instructions on installing the component.
Follow the steps below to install the driver.
5. Insert the PCMCIA Wireless LAN Card to PCMCIA slot of notebook first. (Refer to
Page8 – Hardware installation. )
6. Log in to NT 4.0 as Administrator.
7. Double click the Network icon in the Control Panel, and select the Adapters tab
as shown in the following screen. Then click Add to add a new adapter to continue.
22
Advertisement
Table of Contents
