Unpacking The Sensor - McAfee IIP-M65K-ISAA - Network Security Platform M-6050 Product Manual

McAfee® IntruShield® IPS 4.1
M-6050 Sensor Product Guide

Unpacking the sensor

To unpack the sensor:
1
2
3
4
5
6
7
8
Place the sensor box as close to the installation site as possible.
Position the box with the text upright.
Open the top flaps of the box.
Remove the accessory box.
Verify you have received all parts. These parts are listed on the packing list and
in Contents of the sensor box.
Pull out the packing material surrounding the sensor.
Remove the sensor from the anti-static bag.
Save the box and packing materials for later use in case you need to move or
ship the sensor.
9
Before You Install
Unpacking the sensor