McAfee® IntruShield® IPS 4.1
IntruShield Sensor 1400 Product Guide
Usage restrictions
The following restrictions apply to the use and operation of an IntruShield sensor:
Unpacking the sensor
To unpack the sensor:
1
2
3
4
5
6
7
8
Contents of the sensor box
The following accessories are shipped in the sensor box:
•
You may not remove the outer shell of the sensor. Doing so will invalidate
your warranty.
•
The sensor appliance is not a general purpose workstation.
•
McAfee prohibits the use of the sensor appliance for anything other than
operating the IntruShield IPS.
•
McAfee prohibits the modification or installation of any hardware or software
in the sensor appliance that is not part of the normal operation of the
IntruShield IPS.
Place the sensor box as close to the installation site as possible.
Position the box with the text upright.
Open the top flaps of the box.
Remove the accessory box.
Verify you have received all parts. These parts are listed on the packing list and
in Contents of the sensor box. (on page 9)
Pull out the packing material surrounding the sensor.
Remove the sensor from the anti-static bag.
Save the box and packing materials for later use in case you need to move or
ship the sensor.
•
One sensor
•
One CD-ROM containing the sensor software and on-line documentation.
•
One power cord. McAfee provides a standard, 2m NEMA 5-15P (US) power
cable (3 wire). International customers must procure a country-appropriate
power cable with specific V/A ratings.
•
One set of rack mounting ears
•
Fail-closed dongles (two for the I-1200, four for the I-1400, six for the I-2600
and I-2700)
•
One printed Quick Start Guide
•
Release Notes
9
Before you install
Usage restrictions