Restore: Step 4; Polkast Setup - ZyXEL Communications NSA310 User Manual

11.11.4 Restore: Step 4

Use this screen to select the location in the NSA where you want to restore your backup.
Figure 171 Protect > Restore: Step 4
The following table describes the labels in this screen.
Table 89 Protect > Restore: Step 4
LABEL
Step 3. Set a restore target and start restoring
Browse
Previous
Done

11.12 Polkast Setup

Use the Package Management screen to install the Polkast package. Use Polkast for fast, secure,
direct access to your Media Server from your iPad, iPhone or Android device. Use the following
procedure to install the Polkast package.
Note: Polkast is supported in the NSA310, NSA320, and NSA325 models.
Media Server User's Guide
DESCRIPTION
Click this to select a folder where you want to place the restored files.
• Volume - Select a volume from the list.
• Current Location - This is the location of the selected folder.
• Type - This identifies the item as a file or folder.
• Name - This is the name of the folder/file.
Click Apply to save your settings and Cancel to close the screen.
Click this to go back to the previous screen.
Click this to run the restore process and go back to the Backup screen.
Chapter 11 Package Management
271