Restore: Step 2 - ZyXEL Communications NSA310S User Manual

Table 85 Protect > Restore: Step 1
LABEL
Browse
Next

10.13.2 Restore: Step 2

Select a previous archive backup that you want to restore to the NSA.
Figure 145 Protect > Restore: Step 2
The following table describes the labels in this screen.
Table 86 Protect > Restore: Step 2
LABEL
Step 2. Select
Restore Point
Job Name
Media Server User's Guide
DESCRIPTION
Click this to select where the previous backup that you want to restore is located.
• Volume - Select a volume from the list.
• Current Location - This is the location of the selected folder.
• Type - This identifies the item as a file or folder.
• Name - This is the name of the folder/file.
Click Apply to save your settings and Cancel to close the screen.
Click this to go to the next screen.
DESCRIPTION
If you selected Remote NSA for the backup you want to restore, you can see a list of all the
backups you performed in the Job Name table.
If you selected Internal or External Volume for the backup you want to restore, you can
see a list of restore times for the backups you performed in the Restored Time table.
Select a previous backup job in the list that you want to restore to your NSA. Once you
choose a job name, all available restore times for that backup job shows in the Restored
Time table.
Chapter 10 Packages
259