Configuring Upnp Port Mapping - ZyXEL Communications NSA310S User Manual

HTTP (Web Configurator)
You can use UPnP port mapping to allow access to the NSA's management screens. If you use UPnP
to allow web configurator access from the WAN, you may want to use a different WAN port number
(instead of the default of port 80) to make it more secure. Remember to use the custom port
number when accessing the NSA's web configurator from the Internet.
HTTP (Web Published Shares)
This is the NSA's web publishing feature that lets people access files using a web browser without
having to log into the Home screens. Use UPnP port mapping to allow access to these files from the
Internet without having to enter a user name or password. See
on web publishing.

8.5.4 Configuring UPnP Port Mapping

Click Network > UPnP > Port Mapping to display the UPnP Port Mapping screen.
Use this screen to set how the Internet gateway's UPnP feature configure's the Internet gateway's
NAT IP address mapping and port mapping settings. These settings allow Internet users connected
to the Internet gateway's WAN interface to access services on the NSA. You can set which port
Internet users need to use to access a specific service on the NSA.
Note: Some Internet gateways will delete all UPnP mappings after reboot. So if the
Internet gateway reboots, you may need to use this screen again to re-apply the
UPnP port mapping.
Figure 68 Network > UPnP > Port Mapping
Media Server User's Guide
Chapter 8 Network
Section 9.8 on page 193 for more
171