Behringer Europower EP2000 Brochure & Specs page 4

EUROPOWER
EP4000/EP2000
OUTPUT POWER
20 Hz – 20 kHz @ 0.1% THD, both channels driven
EP4000
8 Ω per channel 550 W
4 Ω per channel 950 W
2 Ω per channel 1250 W
EP2000
8 Ω per channel 350 W
4 Ω per channel 500 W
2 Ω per channel 650 W
RMS @ 1% THD (sine wave), bridged mode
EP4000
8 Ω 1750 W
4 Ω 2400 W
EP2000
8 Ω 1000 W
4 Ω 1300 W
Peak Power, both channels driven
EP4000
8 Ω per channel 750 W
4 Ω per channel 1400 W
2 Ω per channel 2000 W
EP2000
8 Ω per channel 400 W
4 Ω per channel 750 W
2 Ω per channel 1000 W
Peak Power, bridged mode
EP4000
8 Ω 2800 W
4 Ω 4000 W
EP2000
8 Ω 1500 W
4 Ω 2000 W
For service, support or more information contact the BEHRINGER location nearest you:
Europe
MUSIC Group Services UK
Tel: +44 156 273 2290
Email: CARE@music-group.com
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER is part of the MUSIC Group (music-group.com). All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss
which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group products are sold through authorized fullfillers and resellers only.
Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands. 985-10000-00383
EP4000
Distortion
EP2000
Distortion
Frequency Response
At 10 dB below rated
output power
At -3 dB points
EP4000/EP2000
Damping Factor
Noise
Voltage gain
EP4000/EP2000
EP4000/EP2000
Input sensitivity
VRMS (@ 8 Ω)
Input Impedance
Controls
Front
Rear
Indicators
POWER
CLIP
SIGNAL
Connectors
Inputs
Outputs
USA/Canada
MUSIC Group Services NV Inc.
Tel: +1 702 800 8290
Email: CARE@music-group.com
<0.02%
<0.01%
20 Hz – 20kHZ, +0/-dB
5 Hz – 50 kHz
>300 @ 8Ω
Unweighted, 20 Hz to 20 kHz -100 dB
40X (32 dB)
50X (34 dB)
1.15 V (+3.4 dBu)
10 kΩ unbalanced, 20 kΩ balanced
Power switch, gain control
(channels 1 and 2)
DIP switches (10x)
green LED
red LED, 1 per channel
yellow LED, 1 per channel
Balanced XLR and ¼" TRS connectors
Touch-proof binding posts and
professional speaker connectors
Japan
MUSIC Group Services JP K.K.
Tel.: +81 3 6231 0454
Email: CARE@music-group.com
EP4000/EP2000
Cooling Continuously variable speed fan,
back-to-front air flow
Amplifier protection Full short circuit, open circuit, thermal
and HF protection Stable into reactive
or mismatched loads
Load protection Turn-on/off muting, AC coupling
EP4000
Output circuit type Class H complementary linear output
EP2000
Output circuit type Class AB complementary linear output
POWER SUPPLY
EP4000/EP2000
Mains Voltage/Breaker 100-120 V~, 50/60 Hz 15A
220-230 V~, 50/60 Hz 8A
EP4000
Power consumption 2600 W
EP2000
Power consumption 1600 W
EP4000/EP2000
Mains Connector Standard IEC receptacle
DIMENSIONS/WEIGHT
EP4000/EP2000
Dimensions (HxWxD) approx. 3.5 x 19 x 15.8"
approx. 88 x 483 x 402 mm
EP4000
Weight approx. 36.6 lbs / 16.6 kg
EP2000
Weight approx. 34.6 lbs / 15.7 kg
Please note these specifications are preliminary and conceptual in nature,
and as such are subject to change as product development progresses.
This information is supplied for market research purposes only and is not
to be made public in any manner. This document is solely the property of
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon
request of the owner.
Page 4 of 4