Super IO Configuration
Advanced
Super IO Configuration
Super IO Chip
Serial Port 0 Configuration
Serial Port
Device Settings
Change Settings
Device Mode
Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
► Serial Port
This item is used to enable or disable the serial port (COM).
► Device Settings
This item shows the resource assigned to the serial port.
► Change Settings
This item is used to select an optimal settings for the serial port.
► Device Mode
This item is used to change the serial port mode.
► Parallel Port
This item is used to enable or disable the parallel port.
► Device Settings
This item shows the resource assigned to the parallel port.
► Change Settings
This item is used to select an optimal settings for the parallel port.
► Device Mode
This item is used to change the parallel port mode.
Aptio Setup Utility - C opyright (C) 2010 American Megatrends, Inc.
IT8728
[Enabled]
IO=3F8h; IRQ=4;
[Auto]
[Standard Serial Po...]
[Enabled]
IO=378h; IRQ=5;
[Auto]
[Standard Parallel...]
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
30