Turbo Mode; Serial Port; Device Settings; Change Settings - Foxconn H61MXE Series User Manual

►Turbo Mode

Turbo mode allows processor cores to run faster than its marked frequency in specific condi-
tion.
► Performance Memory Profiles
This item is used to select performance memory profile.
Options:[Automatic], [Manual], [XMP Profile 1], [XMP Profile 2].
[Automatic]- Configuration database of using performance memory profile.
[Manual]- Configuration database of using performance memory profile. The next submenu
will apear when select this item.
[XMP Profile 1]-Configuration database of using XMP timing profile 1.
[XMP Profile 2]- Configuration database of using XMP timing profile 2.
IT8772E Super IO Configuration
Advanced
IT8772E Super IO Configuration
IT8772E Super IO Chip
► Series Port O Configuration
Serial Port 0/1 Configuration
Press <Enter> to go to its submenu.

► Serial Port

This item is used to enable or disable the serial port.

► Device Settings

This item shows the resource assigned to the serial port.

► Change Settings

This item is used to select an optimal settings for the serial port.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
IT8772E
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Set Parameeters of Series Port
O (COMA)
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
26