Wireless Connection Safety Instructions; Fcc Compliance Statement - Epson WF-B4023 User Manual

Table of Contents

• Do not put your hand inside the product or touch any packs during printing.

• Install a new ink pack immediately after removing an expended one. Leaving packs uninstalled can

dry out the print head and may prevent the product from printing.

• Do not remove or tear the label on the pack; this can cause leakage.

• Do not shake packs after opening their packages; this can cause them to leak.

• Use an ink pack before the date printed on its package.

• Do not dismantle an ink pack. This could damage the print head.

• Store ink packs in a cool, dark place.

• After bringing an ink pack inside from a cold storage site, allow it to warm up at room temperature for

at least three hours before using it.

Parent topic:

Wireless Connection Safety Instructions

To avoid adversely affecting the operation of the following equipment and causing an accident, do not

use the product:

• Near medical equipment in a medical facility.

• Within 8.7 inches (22 cm) of a cardiac pacemaker.

• Near automatically controlled devices, such as automatic doors or fire alarms.

Parent topic:

For United States Users

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio or television reception. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause interference to radio and television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

General Printer Safety Instructions

Table of Contents