To Perform A Countdown; Confi Guring Option Settings; To Stop A Tone/Vibration Alert Operation - Casio 3407 Operation Manual

Operation Guide 3407
●
B and D to change the hours and minutes settings.
3
Use
Holding down either button scrolls the setting at high speed.
To specify a start time of 24 hours, set the timer to 0:00.
●
4 After all the settings are the way you want, press
screen.

To perform a countdown

●
The following shows button operations for a countdown.
D D
Start Stop (Restart)
Note
A tone/vibration alert is performed for about 10 seconds when the end of the
countdown is reached, and the display returns to the screen that was shown
before the countdown was started.
E-40
Setup
You can use the Setup Mode to check Mobile Link information and to confi gure
various option settings.
For information about Mobile Link information, visit the "User's Guide for Mobile Link
Functions" page of the CASIO website.
E-42
●
C fi ve times to enter the Setup Mode.
1
In the Timekeeping Mode, press
See "Using Modes" (page E-14).
[SETUP] will appear on the display for about one second, and then the Mobile
Link information screen will appear.
Note
If you do not perform any operation for about two or three minutes while in the
Setup Mode, the watch will automatically return to the Timekeeping Mode.
●
A for about two seconds.
2
In the Setup Mode, hold down
[SET Hold] will appear on the display. After that, [SET Hold] will disappear and
the screen for setting the alert duration for notifi cations from mobile phone will
appear.
E-44
●
4
Confi gure option settings for each of the above items.
See "◆ Confi guring Option Settings" below for details.
●
5
After all the settings are the way you want, press
screen.
You can press A to exit the setting screen from any one of the option setting
screens.
●
6
To return to the Timekeeping Mode, press
E-46
b. Animation display on/off
●
Press D to toggle animation display between
on and off.
Note
Animation is not displayed in the case of alerts
other than those for incoming phone calls.
E-48
A to exit the setting
D D B
(Stop) Reset
A to exit the setting
C.
Even if you exit the Timer Mode while a timer countdown is ongoing, the
countdown will continue and the tone/vibration alert operation will be
performed when the end of the countdown is reached.

To stop a tone/vibration alert operation

●
Double-tapping the center of the watch display or pressing any one of the
buttons will stop an ongoing tone/vibration alert operation.
Confi guring Option Settings
The items that can be confi gured as option settings are described below.
Item
Alert duration setting
Notifi cation from Animation display on/
mobile phone off setting
Alert method setting
Alarm/timer Alert method setting
●
C cycles through available settings in the sequence shown
3
Each press of
below.
C
a. Alert duration for notifi cation
from mobile phone
C
f. Alert method for alarm/timer
C
e. Alert method for notifi cation of
other phone events
C
◆
Confi guring Option Settings
a. Alert duration for notifi cation from mobile phone
●
Press D to select an alert duration setting
Vibration type
(2 seconds, 3 seconds, 4 seconds).
●
You can also use this setting screen to change
the vibration type, if you want.
Press B to select a vibration type (A, b, C).
Note
The vibration type for the alarm and timer is fi xed
Alert duration
and cannot be change.
c. Alert method for notifi cation of incoming calls
d. Alert method for notifi cation of incoming mail
e. Alert method for notifi cation of other phone events
●
Use D to select the alert method.
Incoming call alert
method icon
No icon : No alert by either tone or vibration
E-41
Description
Specifi es the alert duration for incoming phone
calls, incoming mail, etc.
Turns animation display on or off for incoming
phone calls.
Specifi es tone and/or vibration for incoming
phone calls, incoming mail, etc.
Specifi es tone or vibration for alarms and timer
time up alerts.
E-43
b. Animation display on/off
C
c. Alert method for notifi cation of
incoming calls
C
d. Alert method for notifi cation of
incoming mail
E-45
E-47
: Alert by vibration
: Alert by tone
: Alert by vibration and tone
Alert is by display indication only.
E-49