Storing Your Hand Blender; Troubleshooting - Dualit hand blender Instruction Manual

stoRInG YoUR
HAnd BLendeR
1 UNPlUg 2 ClEAN & dRY
ensURe tHe HAnd ensure the unit is thoroughly
BLendeR Is UnpLUGGed cleaned before storing.
WHILst In stoRAGe Bacteria can build up quickly
if not cleaned and food is
left on the unit.
3 STORE
place the hand blender in
its box in a cool, dry place
and away from the reach of
children.
20

tRoUBLesHootInG

POSSIblE CAUSE(S)
ThE hANd blENdER dOES NOT TURN ON
1. the unit may not be properly
connected to the power supply.
2. the unit's thermal fuse may have
activated, temporariily disabling it.
ThE blENdER bOdY gETS hOT
1. the unit may have been used for an
extended period of time.
2. the unit may have been processing a
heavy load.
3. the unit may have been left near a heat
source.
ThE MIxTURE IS NOT blENdINg
1. You may have exceeded maximum
volumes.
2. Ingredient chunks may be too large.
3. the speed of chopping may not be
appropriate for the ingredients.
I gET SPlAShES whEN I blENd
1. the unit has very powerful blades and
attachments which rotate very fast.
SOlUTION(S)
1. check the plug is in the socket and the switch
in turned on.
2. this product is fitted with a resettable
thermal cut-out and surge protection, if the
hand blender does not turn on or the motor
stops, the unit is not broken, stop, unplug, allow
to cool and then restart.
1. Allow the unit to fully cool. Your hand
blender is designed for intermittent use, the
motor is very powerful, see operation and rest
times below max loadings in this instruction
book.
2. some heat will be generated during normal
use, particularly on very hot days, never leave to
rest in direct sunlight.
3. store in a cool, dark place.
1. refer to max loadings chart (pg 14) and
blend ingredients in smaller batches.
2. the food chunks are too large, try chopping
into smaller chunks and try again.
3.1 You are using the wrong speed selection,
set to a slower speed, pulse and gradually
increase mixer speed.
3.2. the blade may be damaged, contact dualit
for further advice and spares information.
1.1 dip the wand into the mixture before
turning the power on.
1.2 try using a deeper bowl or jug, even when
blending small mixtures.
1.3 set the speed wheel to a slower setting and
then increase speed as you blend.
1.4 do not go over the MAx mark on the sides
of the wand while blending.
21